Welcome to Adobe GoLive 5

PayPal—Shopping Cart service to make fast, easy, and secure payments for your DLM Parts purchases!
 Visa Mastercard Discover American Express eCheck



Shipped Ist Class Postage in the USA

For Air Post to Canada, Mexico and Overseas orders see info on Contact / Ordering Page


THE ORIGINAL SERIES PARTS FOR THE USS ENTERPISE AMT KIT 1/537 SCALE
SERIES PRODUCTION PARTS
Welcome to Adobe GoLive 5

Series Production Parts
Resin detail parts for 22" "Cut-a-way" Starship:
        Resin cast in gray polyurathane plastic.  Parts are to correct production shortcuts and  omissions by the kit manufacturer. Experienced modelers can now make a more  accurate model of the studio miniature.  Options for lighting as well (see below).   Instruction Manual Included.

Price of set $50.00


         Set includes:
       * Upper Levels Deck and Command Bridge (1)
       * Planetary Sensor Dome, clear (1)
       * Planetary Sensor Array Ring (1)
       * Warp Engine Aft End Caps (2)
       * Warp Engine Front Dome (1) clear
       * Final Stage Flux Chillers (3)
       * Intake Sink Field Generators (6)
       * Shuttle Bay clam shell doors and Control Room (1)
       * Impulse Engine replacement (1)
       * Main Deflector Dish and Spike
       * Final Stage Intercoolers (4)
       * Warp Field Enhancement Grids (8)

$50.00 DLM-01Series Production Parts
Resin detail parts for 22" "Cut-a-way" Starship

1st and 2nd Pilot Episode Parts
1st Pilot Parts
2nd Pilot Parts
Welcome to Adobe GoLive 5

PILOT EPISODE PARTS
1st and 2nd Pilot Episode Parts

    These are the parts that will convert your cut-away starship model to the vessles as seen in the pilot episodes of "The Cage" and "Where No Man Has Gone Before"
Set includes:

•Upper Levels Deck and Command Bridge (1)
Features recessed ports and raised relief detail, Bridge, Clear dome ( Clear cast piece, includes Accurate Parts Upper decks crafted by Andy Henshaw.)

• Planetary Sensor Dome, clear (1)
• Planetary Sensor Array Ring (1)
• Warp Engine Aft End Caps (2)
    (2 styles specify for 1st pilot or 2nd Pilot)
• Warp Engine Front Dome (1) (clear resin with mounting holes for spikes)
• Warp Engine Dome Spikes (2)
• Final Stage Flux Chillers (3)
• Intake Sink Field Generators (6)
• Shuttle Bay (1) (Smooth, no detail)
• Impulse Engine replacement (1)
     (2 styles specify for 1st pilot or 2nd Pilot now cast in clear red for lighting)
• Main Deflector Dish and Spike (Larger diameter)
• Warp Engine Flat Fillet Parts (2) (For end of depression on the Nacelles)
• Instruction Manual Included

$45.00 DLM-01.1 Ist Pilot Episode Parts
Resin detail and lighting parts for 22" "Cut-away" Starshi
p


$45.00 DLM-01.2 2nd Pilot Episode Parts
Resin detail and lighting parts for 22" "Cut-away" Starship


Welcome to Adobe GoLive 5

Circuit Boards and DLM Resin Parts Option for lighting of 22" "Cutaway" Enterprise:
With Waddell Warp Board (WWB) and Electronics Parts

A comprehensive combination of Resin Detail and Lighting Parts plus the WWB Electronics for lighting the Classic Enterprise (Cut-away Model).  Just add parts and solder.

   The bare circuit  boards design includes an LED flasher that can flash red, green and white LEDs posit ion lights and two additional round printed circuit boards for the rotating Warp Engines effects with fifteen  "rotating" LEDs in a three step sequence. An additional flasher circuit is included to act as a strobe light like ION Pod effects.  Flash rates for the navigation running lights and warp engines are adjustable by the builder.

  This is a 6 volt system that draws current at 700ma, which powers 4  flashing navigation light LEDs, 32 rotating LEDs for Warp Engines. Two white LEDs act as strobe Ion Pods.  Boards are pre-etched, holes are undrilled.  Experience with soldering and basic  electronics would be helpful.
Comes with a profusely illustrated instruction book for construction and lighting of the model.  Instructions will provide lists of all needed parts for required electronic components, fiber optics, lamps and where to get them from reliable mail order sources.  Model finishing and markings tips are included as well.


The resin details for this upgrade kit includes water clear Upper Decks and Bridge designed by Accurate Parts (Andy Henshaw) also included is the Impulse Engine cast in clear red.

The price of the TOS Series Production upgrade Parts

Including the WWB Circuit Boards with Electronics is $105.00

$105.00

DLM-02.5 22" TOS Enterprise Upgrade / Detail Parts w/ Litng Circuit Bds and Electronics

Parts and Circuit lighting options for the Pilot Episodes are made upon request also ask about Prebuilt and Tested Electronics. Call or write don@dlmparts.com for options.


CLASSIC STARSHIP ENTERPRISE LIGHTING KIT
(For AMT Cut-Away Upgrade)
WADDLE WARP BOARD
Circuit Boards With Parts
Preview the Upgrade kit and electronics by downloading the PDF file of the instruction manual
It is a 8 meg pdf file.  23 pages in lenght.  As compared to the printed book all the pictures are sharp, focused and in color. Adobe Acrobat is required to read the file.

  Document
Cut-Away USS Enterprise Ugrade Construction Manual
Welcome to Adobe GoLive 5

WADDELL WARP BOARDS ARE NOW TO BE ISSUED AS KITS
Complete with IC chips, resisters, LEDs and wire ribbon cable.

The WWB circuit boards are constantly being improved upon with and has reached a new step with the issue of electronic parts to populate the circuit boards that drive the operating lights of the AMT model kit of the USS Enterprise. Though constant tinkering and component updates it is decide to issue the board with enough electronics parts to fully assemble a working board, This even include a length of ribbon cable to create a wire harness.

It would be up to the builder to provide a 6 volt DC Power Supply, Power connectors and extra white LED with limit resisters or 6 volt lamps.

Update sheets to the TOS Cut-away Upgrade Kit construction manual is provided with updated wire diagrams.

Waddell Warp Boards Kit: $70.00

_____DLM-02.6 WWB TOS Circuit Board kits with Parts $70.00




PREVIOUS PURCHASERS OF THE WWB BOARDS PLEASE NOTE:
If you have the boards already and just need parts DLM is able to provide the kits parts and ribbon cable from DigiKey for $45.00

Waddell Electronics Parts Kit: $45.00


_____DLM-02.6P WWB Electronics Parts...Pre WWB Purchase $45.00


A BUILDT WWB CIRCUIT BOARD SET
WWB Wire and Assembly
WWB Circuit Boards Available Now With Parts
ACCURATE DECAL REPLACEMENT SHEET
FOR THE 1/537 SCALE  22" TOS ENTERPRISE 

Welcome to Adobe GoLive 5

Cut-away Enterprise decal

IMPROVED DECALS FOR THE CUTAWAY ENTERPRISE MODEL


A all inclusive decal  set for the Cut-away Enterprise model. ALPS printed on 8.5 x 11 clear decal film.  It features all the markings used in the series production studio miniature plus markings of extra letters and numbers for custom Star Fleet starships.  Also featured are markings particular to the 1st and 2nd Pilot Episode studio miniature.

Price of decal $17.50

$17.50_____DLM-01.3

22" Cutaway Enterprise Decal


ACCURATE PARTS, 18 Inch AMT/ERTL CLASSIC ENTERPRISE KIT
The Classic 18" kit of the AMT Classic kit of the Starship Enterprise is making a comback...Fall 2008

The Accurate Parts for the old 1960's era 18" AMT/ERTL kit of the USS Enterprise are made available again and now stocked in the DLM inventory. Cast in gray resin with a clear dome or cast completley clear for lighting purposes.
Also added to the inventory is the Waddell Warp Board (WWB) modified and resized to fit  to the classic kit.

Welcome Back STAR TREK!

Clear Caps and Resin Moints Rings
Welcome to Adobe GoLive 5

CLEAR WARP DOMES
For The Classic AMT Enterprise Kit 1/650 Scale


Clear acrylic domes and resin cast mounting rings will allow the builder to light up the domes of the Warp Engines. This set replaces the styrene kits parts. Glue into place with CA glues or Epoxy.

Two (2) 7/8 acrylic domes
Two (2) resin cast mounting rings. 1/8 inch inside diameter.

This set is issued free with the WWB circuit kit. The perfect ends to cap off your authentic lighting of the star ship Enterprise.


FREE with the purchase of the WWB TOS 18" circuit kit.

CLEAR WARP DOMES
Sold Separate, as a pair....$12.50


Welcome to Adobe GoLive 5

Classic Original Series parts for the 18 Model.

(Scale 1/650)

Accurate Parts AU
Crafted by Andy Henshaw of Australia


Opaque gray resin parts (3) consist of Clear Resin Dome, Bridge, A/B Deck Levels $12.50

Clear resin parts (3) for lighting purposes consists of Clear Resin Dome, Bridge, A/B Deck Levels. $17.50

Sold in 3 configurations:

•18 Inch Enterprise Series Production Bridge and AB Decks


DLM-25-SP Gray Resin Clear Dome $12.50



DLM25.1-SPC TOS Series Pro Clear $17.50




PILOT EPISODE BRIDGE PARTS
Write for Details

Excess Pilot Episode parts are on hand and are discounted
$10 for Gray Resin
$15 for Clear

Write for details before ordering these... I could go lower price while supplies last

•18 Inch Enterprise 1st Pilot Bridge and AB Decks

•18 Inch Enterprise 2nd Pilot Bridge and AB Decks

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

NEW AND IMPROVED!
WADDELL WARP CIRCUIT KIT FOR
CLASSIC 18” AMT USS ENTERPRISE


Smaller warp engines discs resized to fit the the classic 18 inch long kit (Scale 1/650)
Assembles and functions like the 22” WWB system as described above.
Special shaped smaller LEDs include that fit well onto the Warp circuit discs.
Circuit boards and parts are available now as kits.
Now includes Clear Warp Domes and Resin Cast Mounting Rings...Price for circuit kit with electronics parts and wires is $80.00

Want a Pre-buildt and tested WWB circuit?

DLM can build it for you. If you are not familure or comfortable with assembly of circuit kits... I will build and test the WWB circuit kit for you. As a rule of thumb prebuildt and tested DLM circuits are double the price of that of the boards and electronics parts kits (ie $160) All are hand made and can be customized to your specific needs. Please allow for an extra 2 weeks for a custom build and delivery. Some soldureing skills by the you the model buider is required as you must route the wire harness through the model and hook it up to your power supply (6Volts DC 700-800ma). You must provide your own power supply and provide for your own interior model lighitng with lamps or LEDs. Detailed instructions included.

Write or call for details.